Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Remove bolts -3- and -4-.
Note
Disregard -item 1- and -item 2-.
– Unscrew bolts -arrows- for engine mountings (left and right).
– Remove engine cross member.
– Unplug electrical connector -2- at engine mounting (right-
side).
– Unbolt retainer -1- for electrical wiring at engine support.
– Unscrew bolts -arrows-.
– Remove engine support (right-side) with engine mounting.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
5. Removing and installing starter 71
To Next Page
Loading...
