Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
– Unscrew bolts -arrows- at front gearbox mounting (left and
right).
– Screw the spindles for support elements (left and right) at sub‐
frame all the way down.
– Unscrew both base plates of support elements for subframe
on scissor-type assembly platform - VAS 6131- .
– Detach support elements.
– Remove the subframe to the side.
– Screw the spindles for support elements -1- (left and right) at
engine cross member -4- all the way down.
– Unscrew bolts -arrows- for engine mountings (left and right).
– Remove engine cross member.
– Unbolt retainer for electrical wiring at engine support (right-
side) -arrow-.
Audi A8 2003 ➤
Electrical system - Edition 08.2014
5. Removing and installing starter 73
To Next Page
Loading...
