2
About Safety
10/198 CCD CAM 100 – Installation and Operating Manual
2.2 Non-intended Use
Every use is non-intended, that is not described in the chapter
Intended Use or does not comply with the guidelines specified
there, see Intended Use, page 9.
2.2.1 Non-intended Infringement of Guidelines
■ Infringement of operating, maintaining or installation instructions
■ Unsuitable, incorrect or unauthorized use of the product
■ Operating the product in an environment not intended for its
use
■ Operating the product in breach of the legal safety guidelines
relevant at the location of use
■ Neglecting the warning and safety instructions in the relevant
documents for the product
■ Operating the product under faulty safety and protective condi-
tions
2.2.2 Non-intended Operation
■ Operation by unauthorized or insufficiently qualified personnel
■ By-passing, disassembling, switching off or manipulation of
safety equipment
■ Incorrect or negligent handling by the customer
■ Any intervention, modification or conversions on the product
without the express approval of BST GmbH
■ The use of unsuitable operating materials or spare parts
■ Operation of the product near to sources of interference, e.g.
electro-magnetic fields (high voltage lines) or sources of heat
■ Operation of the product under the influence of chemical,
electro-chemical or electrical factors
To Next Page
Loading...
Need help?
General
