BST CCD CAM 100 User Manual

Commissioning
8
CCD CAM 100 – Installation and Operating Manual 79/198
8.5 Loading the Default Settings
\ Normal Setup \ Default Settings
The Default Settings menu is used to reset the camera parameters
to the factory default settings (delivery state). If required, you can
load saved camera parameters from a memory card (e.g. after
replacing a defective CCD camera).
Fig.46: Default Settings menu
Function Description
Factory Default Restoring the factory default settings
Delete White Balance Loading the default values for the white balance
Load Parameter
Loading camera parameters from a memory card
Requirement:
A microSD memory card with a stored parameter set is located in
the memory card slot of the CCD camera (see Inserting/Removing
the Memory Card, page 115).
Use this function,
■ to load customer-specific parameter settings (e.g. after
replacing a CCD camera)
■ to transfer customer-specific parameter settings from another
CCD camera
When restoring the factory settings, the values of all
parameters (except for the calibration values for touch-
screen and accelerometer) are overwritten by the factory
default settings.
When loading the camera parameters from the memory
card, the current parameter settings are overwritten by
the saved settings. This process cannot be undone!

BST CCD CAM 100 Specifications

General

Brand	BST
Model	CCD CAM 100
Category	Accessories
Language	English