About Safety
2
CCD CAM 100 – Installation and Operating Manual 11/198
2.2.3 Non-intended Modification of Electronic Data
■ No virus scanners, firewalls or similar items may be installed on
any products of BST GmbH. Virus scanners or other scan or
registration programs must not (be able to) access products via
networks.
■ Writing, deleting and editing of system data / files on BST
products is not permitted. Exempt from this is service work
carried out at the instruction of BST GmbH.
■ Access of any external software to BST products via networks is
not permitted.
■ USB memory sticks may only be used together with BST
products if they are free of viruses and harmful software.
■ Products or supplied software from BST GmbH must never be
modified without permission.
■ All software supplied is protected by copyright and must not be
edited, copied or made available to third parties. Except where
explicit approval has been sought from BST GmbH or the
respective owner of the copyright.
To Next Page
Loading...
