BST CCD CAM 100 - Service Interface; Memory Card Slot

Design and Function
3
CCD CAM 100 – Installation and Operating Manual 31/198
3.7.3 Service Interface
A service interface (socket X42) is located behind the cover of the
service opening.
Fig.13: Service interface
Interface USB Mini-B
3.7.4 Memory Card Slot
A memory card slot ① is located behind the cover of the service
opening.
Fig.14: Memory card slot
The following memory cards are supported:
Memory card type microSD
Memory capacity 4…16GB
You can use the memory card ②,
■ to transfer the camera parameter to another CCD camera
■ to install firmware updates
To insert or remove the memory card, Inserting/Removing the
Memory Card, page 115.