Shutting Down and Disposal
13
CCD CAM 100 – Installation and Operating Manual 193/198
13 Shutting Down and Disposal
When shutting down and disposing of the system, the applicable
national laws and guidelines must be observed.
Moreover, the safety concept of the entire system must be ob-
served in which the system is installed. The necessary procedures
must be prepared by the manufacturer of the machine.
To a great extent, the system is made from electric / electronic
components and materials that, depending on the compilation,
can be returned for recycling. Also note the legal regulations as
well as local recycling guidelines for this purpose.
Returning the system to BST GmbH is always possible. About this
and for all other queries, please contact BST Customer Services,
page 192.
To Next Page
Loading...
