BST CCD CAM 100 - 10.2 Maintenance Table; 10.3 Maintenance and Cleaning Work

10
Maintenance and Cleaning
182/198 CCD CAM 100 – Installation and Operating Manual
NOTICE
Damage to the components from working on live parts.
►
Before opening the housing, disconnect the CAN bus cable.
NOTICE
Damage to the components caused by solvents!
Cleaning agents containing solvents damage the surfaces of the
system components.
►
Never use cleaning agents containing solvents, not even with
intensive soiling, unless the respective cleaning agent is explicitly
listed in the instructions.
►
Follow the cleaning instructions.
10.2 Maintenance Table
The following table gives you an overview of the necessary
maintenance tasks and intervals.
The maintenance intervals specified are reference values. With
particularly intensive stress / soiling, the intervals must be re-
duced.
Carry out the respective maintenance and cleaning as described in
the following chapters.
Maintenance Interval Maintenance tasks to be carried out
Weekly Cleaning the housing.
As required Cleaning the protective filter.
As required Cleaning the camera lens.
As required Cleaning the touchscreen display.
As required Cleaning the light box.
10.3 Maintenance and Cleaning work
10.3.1 Cleaning the Housing
►
Clean using a dry, clean and soft cloth.
►
Use a commercially available liquid cleaner in event of intensive
soiling.