Maintenance and Cleaning
10
CCD CAM 100 – Installation and Operating Manual 183/198
10.3.2 Cleaning the Protective Filter
Spotted or homogeneous soiling of the protective filter can result
in incorrect measurement.
NOTICE
Damage to the protective filter caused by incorrect cleaning!
Damage / scratches caused by incorrect cleaning or dirt particles.
►
Never use cleaning agents.
►
Clean the protective filter only using a dry, clean and soft cloth.
►
Make sure that no dirt particles or similar are rubbed over the
protective filter.
1. Clean the protective filter with great care using a dry and
completely clean and soft cloth (e.g. glasses wipe). Do not use
cleaning agents!
2. If the inside of the filter is dirty, carefully unscrew the protective
filter from the lens barrel for cleaning.
10.3.3 Cleaning the Camera Lens
Spotted or homogeneous soiling of the camera lens can result in
incorrect measurement.
NOTICE
Damage to the camera lens caused by incorrect cleaning!
Damage / scratches caused by incorrect cleaning or dirt particles.
►
Never use cleaning agents.
►
Clean the camera lens only using a dry, clean and soft cloth.
►
Make sure that no dirt particles or similar are rubbed over the
camera lens.
If dust or dirt particles have penetrated into the lens barrel of the
CCD camera, you have to clean the camera lens as follows:
1. Carefully unscrew the protective filter from the lens barrel.
2. Clean the camera lens with great care using a dry and
completely clean and soft cloth (e.g. glasses wipe). Do not use
cleaning agents!
3. Clean both sides of the protective filter with great care using
a dry and completely clean and soft cloth (e.g. glasses wipe).
Do not use cleaning agents!
4. Screw the protective filter into the lens barrel.
10.3.4 Cleaning the Touchscreen Display
►
Clean carefully using a dry, clean and soft cloth (e.g. glasses
wipe).
►
Never rub dirt particles over the sensitive surface.
►
Use a commercially available anti-static cleaner (e.g. screen
cleaner) in event of intensive soiling.