BST CCD CAM 100 User Manual

8
Commissioning
84/198 CCD CAM 100 – Installation and Operating Manual
8.7.2 Operation in the Ethernet Network
The second page of the menu (Ethernet) is used to define the
network settings for operating the CCD camera in an Ethernet
network.
Fig.51: Ethernet menu
8.7.2.1 Setting the IP Address
The IP Address input field is used to assign an IP address to the
CCD camera to allow it to communicate with the network. The
device uses the internet protocol version 4 (IPv4).
You can find a detailed description of the setting in chapter
Setting the IP Address, page 151.
8.7.2.2 Setting the Netmask
The Netmask input field is used to define the subnet mask for the
IP address of the CCD camera.
You can find a detailed description of the setting in chapter
Setting the Netmask, page 151.

BST CCD CAM 100 Specifications

General

Brand	BST
Model	CCD CAM 100
Category	Accessories
Language	English