BST CCD CAM 100 User Manual

9
Operation
168/198 CCD CAM 100 – Installation and Operating Manual
9.9.17 Loading Camera Parameters from Memory Card
\ Load/Store Settings \ Load Settings
The Load Settings menu is used to load the camera parameters
from a microSD memory card.
Fig.108: Load Settings menu
Use this function,
■ to load customer-specific parameter settings (e.g. after replacing
a CCD camera)
■ to transfer customer-specific parameter settings from another
CCD camera
When loading the camera parameters from the memory
card, the current parameter settings are overwritten by
the saved settings. This process cannot be undone!
Loading camera parameters from memory card
›› A microSD memory card is located in the memory card slot of
the CCD camera (see Inserting/Removing the Memory Card,
page 115).
1. Call up the Load Settings menu.
The Load Settings safety prompt appears in the display.
2. Press the Ok button.
The parameter settings are read from the memory card.
The system is restarted after finishing the loading process.

BST CCD CAM 100 Specifications

General

Brand	BST
Model	CCD CAM 100
Category	Accessories
Language	English