BST CCD CAM 100 User Manual

4
Technical Specifications
34/198 CCD CAM 100 – Installation and Operating Manual
4 Technical Specifications
DANGER
Danger of death when operated in potentially explosive areas!
►
The system must not be installed or operated in potentially
explosive areas.
Ambient Conditions
Working temperature +10…+50°C (+50…122°F)
Storage temperature -10…+70°C (+14…+158°F)
Humidity during operation 5…90%, non-condensing
Place of installation Closed, dry building,
height above sea level < 2,000m
Exceptions to these conditions are only possible after consultation
with BST.
Power Supply
Voltage 24V⎓ ±10% (including ripple)
Current 250mA (without external load)
Power consumption 6W (without external load)
Reverse polarity protection yes
Connection Supply via CAN bus interface
(X100) or Power over Ethernet
PoE (X30)
Protection Category
Protection category IP54
Measuring Range
Measuring range variable (see diagram,
Determining the Measuring
Distance, page 52)
Marking in setup mode using LED projection points
Measuring distance min. 250mm
max. 1,600mm
Number of edges that can be
read
max. 8 (CAN bus)
max. 256 (Ethernet)

BST CCD CAM 100 Specifications

General

Brand	BST
Model	CCD CAM 100
Category	Accessories
Language	English