BST CCD CAM 100 - Showing the MAC Address; Selecting the Synchronization Method

9
Operation
152/198 CCD CAM 100 – Installation and Operating Manual
9.9.4 Showing the MAC Address
\ Network \ Ethernet \ MAC
The MAC address of the CCD camera is shown behind the MAC
menu item.
MAC address
Fig.94: Display of the MAC address
The MAC address (Media Access Control Address) is the hardware
address of the CCD camera. It serves to clearly identify the device
in an Ethernet network.
The menu item has only one display function. The settings
cannot be changed.
9.9.5 Selecting the Synchronization Method
\ Network \ Ethernet \ Time Sync.
The Time Sync. menu is used to select the method for the time
synchronization of several CCD cameras (e. g. for logging the
measurement data).
Fig.95: Time Sync. menu
Requirement for synchronization:
■ The CCD cameras are connected to each other via Ethernet.
You can choose one of the following settings:
Synchronization Method Description
Off No synchronization takes place.
E2E
Specification see IEEE1588
standard.
P2P