BST CCD CAM 100 User Manual

Maintenance and Cleaning
10
CCD CAM 100 – Installation and Operating Manual 181/198
10 Maintenance and Cleaning
Maintenance and cleaning work must be carried out as
described in the following. Otherwise increased wear and
system failures may occur.
The CCD camera is classified as an optical instrument. It must be
looked after accordingly.
Claims on the warranty and claims for damage are invalid if
maintenance and cleaning work have not been carried out or not
been carried out correctly.
10.1 Safety Instructions
DANGER
Danger of death caused by the machine starting up!
Parts of your body could be crushed, cut, drawn in or hit.
►
Switch off the machine completely and secure it against it being
switched back on.
WARNING
Risk of injury and material damage caused by incorrect
maintenance / cleaning!
►
Have the maintenance and cleaning carried out only by qualified
personnel that have been instructed by BST service personnel or
authorized personnel.
►
Carry out the maintenance and cleaning as described in the
following chapters.
►
With particularly intensive stress / soiling, reduce the specified
maintenance intervals.
WARNING
Eye injuries and dazzling from looking directly into the light source!
Looking directly into the lighting may lead to impaired eyesight and
subsequent accidents.
►
Never look directly into the light source when switched on!
►
Using suitable measures, make sure that direct eye contact with
the lighting is impossible.
►
Switch off the light source and wait ten minutes before carrying
out maintenance, repair, cleaning or installation work.
WARNING
Danger of burns caused by hot lamps!
Lamps and light units can cause severe burns when touched, as
they become very hot during operation and only cool down gradu-
ally after being switched off.
►
Completely switch off the system, disconnect it from the power
supply and wait for ten minutes before carrying out any main-
tenance, repair, cleaning or assembly work.
►
Secure the system against being switched on again.

BST CCD CAM 100 Specifications

General

Brand	BST
Model	CCD CAM 100
Category	Accessories
Language	English