BST CCD CAM 100 - Page 184

10
Maintenance and Cleaning
184/198 CCD CAM 100 – Installation and Operating Manual
10.3.5 Cleaning the Light Box
Spotted or homogeneous soiling of the plastic cover can result in
incorrect measurement.
NOTICE
Damage to the light box caused by incorrect cleaning!
Damage / scratches caused by incorrect cleaning or dirt particles.
►
Never use cleaning agents.
►
Clean the plastic cover of the light box only using a moist, clean
and soft cloth.
►
Make sure that no dirt particles or similar are rubbed over the
plastic cover.
►
Clean the plastic cover of the light box with great care using a
moist and completely clean and soft cloth (e.g. glasses wipe).
Do not use cleaning agents!