BST CCD CAM 100 - Page 154

9
Operation
154/198 CCD CAM 100 – Installation and Operating Manual
Example
Two CCD cameras should be operated on a web guiding controller
with the CAN bus address 11 as sensor 1 and sensor 2.
Determining the CAN bus address for CCD camera 1 (sensor 1)
CAN bus address controller = 11 => Address-ones = 1
Sensor allocation = Sensor 1 => Address-tens = 20
=> CAN bus address = Address tens + Address ones = 20 + 1 = 21
Determining the CAN bus address for CCD camera 2 (sensor 2)
CAN bus address controller = 11 => Address-ones = 1
Sensor allocation = Sensor 2 => Address-tens = 30
=> CAN bus address = Address tens + Address ones = 30 + 1 = 31
Controller
CAN Bus Address 11
Sensor 1 Sensor 2
CAN Bus Address 21 CAN Bus Address 31
Fig.97: Setting the CAN bus addresses for a dual camera system