Chery QQ Service Manual Transmission System
1- Shift fork
2- Hub sleeve
Fig.3-47
1.Use feeler gauge to check the clearance between shift fork and hub sleeve, if
the clearance exceeds 1.0mm, please replace the parts.
Notice: Check the contact position of shift fork and hub sleeve carefully to determine
if replace the parts.
Clearance“a” ： Maintenance Limit: 1.0mm
2. Insert the shift lever into the hole of the case, check if it works smoothly, if
there is any retardarce, please correct with winch or similar tools.
Reverse, 5th shift fork shaft assembly
1- Reverse Shift fork
2- Spring
3- Ball
4- Slotted spring pin
5-Reverse, 5th Shift fork
6-Reverse , 5th Shift head
7-Reverse , 5th guide shaft
A ： Slotted spring pi
To Next Page
Loading...
