Chery QQ Service Manual Transmission System
-103-
Chery Automobile Co., Ltd
（3）Scrape off the lubricant and remove the holding snap ring with special tool (A).
1， Boot hoop
（4）Draw out the holding and boot.
1， Holding
Notice:
The end of wheel universal joint。
III， Installation
1， Installation of propeller shaft.
（1）Clean the parts (except the boot) and dry the parts with compressed air.
（2）Use a piece of clean and dry cloth to clean the boot, be sure not to use skim milk
(such as gasoline or coal oil).
（3）Put the boot onto the axle till the small diameter set in the shaft slot and fix
the hoop.
To Next Page
Loading...
