Chery QQ - Page 209

Chery QQ Service Manual Transmission System
-107-
Chery Automobile Co., Ltd
1.Snap ring
2.Output shaft
1.Right oil
seal
2 ，
L
bi t
VI， Installation
Install the propeller shaft assembly according to the reverse order, clean the front
wheel bearing oil seal and spread lubricant.
First install the end of wheel universal joint on the steering and then install the
universal joint on the end of differential.
Manual transaxles drain plug seal。
Fill up the transaxles.
Caution:
Do not hurt oil seal and boot.
Do not hammer the universal joint boot to adjust, use the hands to insert the
universal joint.
Be sure the differential universal joint has been inserted to the right position and
the snap ring has been placed on the original position.
1. Front wheel bearing seal
2. Suspension arm