Chery QQ Service Manual
2. Remove front door sealing strips
Pull out sealing strips by hand
- 259 – Chery Automobile Co.,Ltd
3. Remove outside inlaid strips
Take down screws and outside inlaid strips
4. Remove the upper inlaid strips
on windshield
As showed in the figure：Cut off
inlaid strips with knife
Attention：Do not let knife damage
car body
5. Remove windshield
（1）Lead piano wire out between car
body and windshield from interior car
（2）Bind up two wires ends with wood
blocks or similar objects
Note：Stick a piece of adhesive tape outside to prevent windshield external
surface from being scratched
Attention：
（1）Do not damage paint surface, internal
and external ornaments when detaching
piano wire bonding agent
windshield
（2）To avoid the scratch on dashboard,
a sheet plastic can be placed between
piano string and dashboard
Drag the wire along all sides of windshield
to cut off bonding agent to remove windshield
Attention：Bonding agent should be kept on car body as much as possible
when cutting windshield joint
To Next Page
Loading...
