Cisco 10000 Series

To Next Page

To Previous Page

Contents

Cisco 10000 Series Router Quality of Service Configuration Guide

OL-7433-09

Frame Relay QoS Inheritance 4-12

map-class frame-relay Command 4-12

Syntax Description 4-12

map-class frame-relay Command History 4-13

Usage Guidelines for the map-class frame-relay Command 4-13

Restrictions and Limitations for Frame Relay QoS Service Policies 4-13

Creating and Attaching QoS Policies to Frame Relay Interfaces, Subinterfaces, and Data-Link

Connection Identifiers 4-14

Attaching a QoS Service Policy to a Frame Relay Interface or Point-to-Point Subinterface 4-14

Attaching a QoS Service Policy to a Frame Relay DLCI 4-17

Attaching Virtual LAN QoS Service Policies 4-20

Feature History for VLAN QoS 4-20

VLAN QoS Inheritance 4-21

Restrictions and Limitations for Attaching QoS Services to VLAN Subinterfaces 4-21

Attaching QoS Policies to VLAN Interfaces and Subinterfaces 4-21

Attaching QoS Service Policies to Physical Interfaces with VLAN Subinterfaces 4-22

Attaching QoS Service Policies to VLAN Subinterfaces 4-23

Attaching Virtual Access Interface QoS Service Policies 4-23

Feature History for VAI QoS 4-24

VAI QoS Inheritance 4-24

Restrictions and Limitations for Attaching QoS Services to a VAI 4-25

Attaching QoS Policies to VAIs Using Virtual Template Interfaces 4-25

Applying a QoS Service Policy to a Virtual Template Interface 4-26

Applying a Virtual Template Interface to a BBA Group 4-27

Attaching a BBA Group to an Interface or Subinterface for PPPoE Sessions 4-28

Attaching Layer 2 Access Concentrator QoS Service Policies 4-30

Feature History for LAC QoS 4-30

LAC QoS Inheritance 4-30

Restrictions and Limitations for Attaching LAC QoS 4-31

Attaching QoS Policies to LAC ATM Virtual Circuits 4-31

Applying QoS on Layer 2 Tunnel Packets 4-32

Verifying and Monitoring QoS Service Policies 4-32

Verification Example for QoS Service Policies 4-34

Cisco 10000 Series - Page 10