Contents
xi
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Unused Bandwidth Allocation 5-3
Traffic Classes That Can Use Excess Bandwidth 5-3
Bandwidth Calculations 5-4
Bandwidth Allocation to PVCs 5-5
Class-Default Bandwidth Guarantee 5-6
Committed Rate Data 5-6
Bandwidth and Priority Service 5-7
Queuing Modes 5-8
Restrictions and Limitations for Bandwidth Distribution 5-9
Configuring Bandwidth Distribution Between Queues 5-10
Configuration Examples for Configuring Bandwidth Distribution 5-10
Configuration Example for Kilobits per Second-Based Bandwidth 5-11
Configuration Example for Percentage-Based Bandwidth 5-11
Configuration Example for Bandwidth-Remaining-Based Bandwidth 5-11
Verifying and Monitoring Bandwidth Distribution 5-12
Verification Example for Bandwidth Distribution 5-13
Distribution of Remaining Bandwidth Using Ratio 5-14
Feature History for Bandwidth-Remaining Ratios 5-14
Bandwidth-Remaining Ratio 5-14
Prerequisites for Distribution of Remaining Bandwidth Using Ratio 5-15
Restrictions for Distribution of Remaining Bandwidth Using Ratio 5-15
Configuring Bandwidth-Remaining Ratios 5-15
Configuring and Applying Bandwidth-Remaining Ratios to Subinterfaces 5-16
Configuring and Applying Bandwidth-Remaining Ratios to Class Queues 5-18
Configuration Examples for Distribution of Remaining Bandwidth Using Ratio 5-20
Configuring Bandwidth-Remaining Ratios on Ethernet Subinterfaces: Example 5-21
Configuring Bandwidth-Remaining Ratios on ATM Subinterfaces: Example 5-21
Configuring Bandwidth-Remaining Ratios on Class Queues: Example 5-22
Verifying Bandwidth Remaining Ratios: Example 5-22
Related Documentation 5-26
CHAPTER
6 Policing Traffic 6-1
Traffic Policing 6-2
Feature History for Traffic Policing 6-2
Policing Actions 6-3
Single-Rate Color Marker for Traffic Policing 6-4
Feature History for the Single-Rate Color Marker 6-5
Configuration Commands for the Single-Rate Color Marker 6-5
police Command (Single-Rate) 6-6
To Next Page
Loading...
