Cisco 10000 Series

3-6
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Chapter 3 Configuring QoS Policy Actions and Rules
Types of QoS Actions
Table 3-3 lists the output policy actions that you can define in a policy map for specific interface types.
Ta b l e 3-3 Output Policy Map Actions
Policy Map
Actions
Interface Type
Normal Tag (MPLS VPN) Virtual Access ATM UBR VCs
bandwidth Va li d Val i d Va l i d
(Applied to the
VC, not the VAI)
Not Applicable
queue-limit Va l i d Va l id Not Available Not Available
priority Va l i d Va l id Va li d
(Applied to the
VC, not the VAI)
Not Applicable
shape Valid Val i d Va l i d
(Applied to the
VC, not the VAI)
Not Applicable
random-detect Va l i d Va l id Not Available Not Available
set ip prec/dscp Va li d Not Applicable Va l i d Valid
set qos-group Not Applicable Not Applicable Not Applicable Not Applicable
set atm-clp Va l i d Not Available Not Available Not Available
set cos Va l i d
1
1. The interface must be an Ethernet interface that is configured for 802.1Q VLAN.
Not Available Va l i d
2
2. The virtual access interface must be using an 802.1Q VLAN interface.
Not Applicable
police Va l i d Va l id Va li d Valid
set mpls
experimental
Not Applicable Not Available Not Applicable Not Applicable