Contents
xiii
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Configuration Examples for Configuring Single-Rate Traffic Policing Based on Bits per
Second 6-28
Configuring Percent-Based Policing 6-32
Configuration Examples for Configuring Percent-Based Policing 6-32
Configuring Two-Rate Policing 6-35
Configuration Example for Configuring Two-Rate Three-Color Policing 6-35
Marking Traffic Using Police Actions 6-36
Configuration Example for Marking Traffic Using Police Actions 6-36
Configuring Dual Police Actions 6-37
Configuration Example for Configuring Dual Police Actions 6-37
Configuration Examples 6-38
Configuration Example for Dual Actions—set-clp-transmit and set-mpls-exp-transmit 6-38
Configuration Example for Dual Actions—set-frde-transmit and
set-mpls-exp-imposition-transmit 6-39
Configuration Example of the set-cos-transmit Police Action 6-40
Verifying and Monitoring Traffic Policing 6-41
Verification Examples for Traffic Policing 6-41
Verifying Policing for a Specific Traffic Class 6-42
Verifying Policing on a Specific Interface 6-42
Verifying Dual Police Actions—set-clp-transmit and set-mpls-exp-transmit 6-43
Related Documentation 6-43
CHAPTER
7 Marking Traffic 7-1
QoS Packet Marking 7-2
Feature History for QoS Packet Marking 7-3
Benefits of QoS Packet Marking 7-3
IP Precedence Marking 7-4
IP Precedence-Based Weighted Random Early Detection 7-4
set ip precedence Command 7-5
Syntax Description 7-5
set ip precedence Command History 7-5
Usage Guidelines for the set ip precedence Command 7-5
IP Differentiated Services Code Point Marking 7-6
DSCP Per-Hop Behavior 7-6
Assured Forwarding 7-7
Expedited Forwarding 7-7
Class Selector Code Points 7-7
DSCP Values 7-8
DSCP-Based Weighted Random Early Detection 7-9
To Next Page
Loading...
