Cisco 10000 Series - Page 14

Contents
xiv
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
set ip dscp Command 7-9
Syntax Description 7-9
set ip dscp Command History 7-10
Usage Guidelines for the set ip dscp Command 7-10
Class of Service Marking 7-10
QinQ Class of Service Marking 7-12
set cos Command 7-12
Syntax Description 7-12
set cos Command History 7-12
Usage Guidelines for the set cos Command 7-12
QoS Group Marking 7-13
set qos-group Command 7-13
Syntax Description 7-13
set qos-group Command History 7-13
Usage Guidelines for the set qos-group Command 7-13
ATM Cell Loss Priority Marking 7-14
set atm-clp Command 7-14
set atm-clp Command History 7-14
Usage Guidelines for the set atm-clp Command 7-14
MPLS Experimental Marking 7-14
QinQ MPLS Experimental Marking 7-15
set mpls experimental imposition Command 7-15
Syntax Description 7-15
set mpls experimental imposition Command History 7-15
Usage Guidelines for the set mpls experimental imposition Command 7-16
Discard-Class Marking 7-16
set discard-class Command 7-16
Syntax Description 7-16
set discard-class Command History 7-16
Usage Guidelines for the set discard-class Command 7-17
Class-Based Frame Relay DE Bit Marking 7-17
History for the Class-Based Frame Relay DE Bit Marking Feature 7-17
Marking and Policing Traffic 7-18
Tunnel Header Marking 7-18
Feature History for Tunnel Header Marking 7-19
Restrictions and Limitations for Marking 7-19
Interfaces Supporting Marking 7-20
Classification and Marking Design Guidelines 7-21