Cisco 10000 Series - Page 17

Contents
xvii
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Interfaces Supporting Traffic Shaping 9-13
Configuring Traffic Shaping 9-13
Shaping a Traffic Class 9-14
Shaping Traffic at the VC-Level and Virtual Path-Level 9-15
Configuration Example for Traffic Shaping at the VC-Level and the VP-Level 9-17
Verifying Traffic Shaping 9-17
Verification Examples for Traffic Shaping 9-19
Configuration Examples for Traffic Shaping 9-21
Configuration Example for Class-Based Shaping 9-21
Configuration Examples for Hierarchical Shaping 9-21
Related Documentation 9-22
CHAPTER 10 Overhead Accounting 10-1
Overhead Accounting Features 10-1
Feature History for Overhead Accounting 10-2
ATM Overhead Accounting 10-2
MLP on LNS with HQoS and ATM Overhead Accounting 10-3
HQoS 10-3
Overhead Accounting 10-3
Traffic Shaping Overhead Accounting for ATM 10-4
Ethernet Overhead Accounting 10-4
Configuration Commands for Overhead Accounting 10-5
Subscriber Line Encapsulation Types 10-5
Overhead Calculation on the Router 10-5
Overhead Accounting and Hierarchical Policies 10-6
Restrictions and Limitations for Overhead Accounting 10-7
Configuring Overhead Accounting in a Hierarchical Policy 10-7
Configuration Examples for Overhead Accounting 10-10
Enabling ATM Overhead Accounting 10-10
Enabling ATM Overhead Accounting on the PRE3 and PRE4 for MLPoLNS 10-11
Enabling Ethernet Overhead Accounting on the PRE2 10-11
Enabling Ethernet Overhead Accounting on the PRE3 and PRE4 10-12
Verifying Overhead Accounting 10-12
Verification Examples for Overhead Accounting 10-13
Verifying ATM Overhead Accounting Using show policy-map 10-13
Verifying Overhead Accounting Using show running-config 10-14
Verifying Ethernet Overhead Accounting with User-Defined Option 10-14
Related Documentation 10-15