Cisco 10000 Series - Page 16

Contents
xvi
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Configuring a Priority Queue with a Guaranteed Bandwidth Based on Kilobits per Second:
Example 8-9
Configuring a Priority Queue with a Percent-Based Bandwidth Guarantee: Example 8-9
Configuring Multi-Level Priority Queues: Example 8-10
Unacceptable MPQ Configurations: Examples 8-10
Verifying and Monitoring Priority Queues 8-11
Verification Examples for Priority Queues 8-11
Verifying a Priority Queue: Example 8-11
Verifying Multi-Level Priority Queues: Example 8-12
Related Documentation 8-13
CHAPTER 9 Shaping Traffic 9-1
Traffic Shaping 9-2
Feature History for Traffic Shaping 9-3
Class-Based Traffic Shaping 9-3
Feature History for Class-Based Traffic Shaping 9-4
System Limits for Class-Based Shaping 9-4
Restrictions and Limitations for Class-Based Shaping 9-4
Hierarchical Shaping 9-4
Feature History for Hierarchical Shaping 9-5
VP-Level Shaping 9-5
VC-Level Shaping 9-5
Shaped UBR PVCs 9-5
How Hierarchical Shaping Works 9-6
Hierarchical Shaping and Oversubscription 9-7
Active ATM VCs 9-7
Restrictions and Limitations for Hierarchical Shaping 9-8
Percentage-Based Traffic Shaping 9-8
History for the Percentage-Based Shaping Feature 9-8
Frame Relay Traffic Shaping 9-8
Feature History for Frame Relay Traffic Shaping 9-9
Restrictions and Limitations for Frame Relay Traffic Shaping 9-9
Configuration Commands for Traffic Shaping 9-9
Differences Between Traffic Shaping Mechanisms 9-10
Bandwidth and Traffic Shaping 9-10
Differences Between Shaping and Policing 9-11
Advantages and Disadvantages of Shaping and Policing for Bandwidth Limiting 9-11
Modifying the VC Weight and the VP Shaping Parameters 9-12
Example Scenarios of Traffic Shaping Usage 9-12