Contents
viii
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Feature History for Class Maps 2-2
System Limits for Class Maps 2-2
PRE3 Class Maps and QoS Scalability 2-3
class-map Command 2-3
Syntax Description 2-4
class-map Command History 2-4
Usage Guidelines for the class-map Command 2-4
qos match statistics Command 2-4
Syntax Description 2-4
Command Default 2-5
qos match statistics Command History 2-5
Usage Guidelines for the qos match statistics Command 2-5
Defining Match Criteria Using the match Commands 2-5
match Commands History 2-9
Usage Guidelines for match Commands 2-10
Class-Default Class 2-11
Restrictions and Limitations for Traffic Classification 2-11
Classifying Traffic Using a Class Map 2-11
Creating a Class Map 2-12
Configuration Examples for Classifying Traffic 2-12
Verifying Traffic Classification 2-13
Verification Example 2-13
Defining QoS Policy Actions 2-13
Related Documentation 2-14
CHAPTER
3 Configuring QoS Policy Actions and Rules 3-1
QoS Policies 3-1
Feature History for QoS Policies 3-2
Defining QoS Actions Using a Policy Map 3-2
System Limits for Policy Maps 3-2
8K Policy Maps 3-3
policy-map Command 3-3
Syntax Description 3-4
Usage Guidelines for the policy-map Command 3-4
Types of QoS Actions 3-4
Input and Output Policy Actions 3-4
Policy Map Actions—Releases Prior to Cisco IOS Release 12.0(17)SL 3-7
Policy Map Actions—Cisco IOS Release 12.0(17)SL and Later Releases 3-10
Policy Map Actions—Cisco IOS Release 12.0(20)ST and Later Releases 3-10
To Next Page
Loading...
Need help?
General
