EasyManuals Logo

Cisco 10000 Series User Manual

Cisco 10000 Series
854 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #817 background imageLoading...
Page #817 background image
B-3
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
Appendix B QoS Policy Propagation Through the Border Gateway Protocol
QPPB Configuration Example
Define the community lists.
Router(config)# ip community-list 1 permit 60:1
Router(config)# ip community-list 2 permit 60:2
Router(config)# ip community-list 3 permit 60:3
Router(config)# ip community-list 4 permit 60:4
Router(config)# ip community-list 5 permit 60:5
Router(config)# ip community-list 6 permit 60:6
Router(config)# ip community-list 7 permit 60:7
Define the AS path.
Router(config)# ip as-path access-list 1 permit ^10_60
Define the access control list.
Router(config)# access-list 69 permit 69.0.0.0
Router B Running Configuration
RouterB(config)# router bgp 10
RouterB(config-router)# neighbor 30.30.30.1 remote-as 30
RouterB(config-router)# neighbor 30.30.30.1 send-community
RouterB(config-router)# neigh 30.30.30.1 route-map send_community out
!
RouterB(config)# ip bgp-community new-format
Match prefix 10 and set community to 60:1.
RouterB(config)# route-map send_community permit 10
RouterB(config-route-ma)# match ip address 10
RouterB(config-route-ma)# set community 60:1
Match prefix 20 and set community to 60:2.
RouterB(config)# route-map send_community permit 20
RouterB(config-route-ma)# match ip address 20
RouterB(config-route-ma)# set community 60:2
Match prefix 30 and set community to 60:3.
RouterB(config)# route-map send_community permit 30
RouterB(config-route-ma)# match ip address 30
RouterB(config-route-ma)# set community 60:3
Match prefix 40 and set community to 60:4.
RouterB(config)# route-map send_community permit 40
RouterB(config-route-ma)# match ip address 40
RouterB(config-route-ma)# set community 60:4
Match prefix 50 and set community to 60:5.
RouterB(config)# route-map send_community permit 50
RouterB(config-route-ma)# match ip address 50
RouterB(config-route-ma)# set community 60:5
Match prefix 60 and set community to 60:6.
RouterB(config)# route-map send_community permit 60
RouterB(config-route-ma)# match ip address 60
RouterB(config-route-ma)# set community 60:6

Table of Contents

Other manuals for Cisco 10000 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 10000 Series and is the answer not in the manual?

Cisco 10000 Series Specifications

General IconGeneral
BrandCisco
Model10000 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals