Cisco 10000 Series User Manual

Index
IN-3
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
BRAS-DSLAM encapsulation types 4
bump command 5
bump command (Frame Relay VC-bundle-member) 33
bump explicit command 6
bump implicit command 6
bumping
circuit 17
not accepting bumped traffic, configuring 27
traffic in bundles 3, 16
bumping PVCs 16
bundle command 6, 9
bundles 16
adding
ATM PVC members 23
bundle members 23
Frame Relay members directly 43, 45
Frame Relay members using map classes 48
attaching
VC classes 22, 27
configuration examples 29
creating
ATM bundles 18, 20
Frame Relay bundles 36, 42
Frame Relay configuration examples 49
management of 4, 14
mapping for PVC bundles 40
mapping MPLS EXP to bundle members 31
monitoring bundles 52
protection rules 3
PVC 1
PVC selection 31
restrictions for bundles 17
system limits for bundles 2
traffic bumping 3
verifying bundles 28
burst-excess 7
burst-normal 7
C
CAC, See call admission check.
calculating
bandwidth in kilobits per second 4, 10
bandwidth percentage 4, 10
committed burst 22
excess burst 22
policing rate 25
call admission check 3
CBR, See constant bit rate.
cbr command 13, 8
CBS, See committed burst.
CBWFQ 4, 7
service policy inheritance 5
CDVT 12, 27
CEF 20
cell delay variation tolerance 12, 27
cell loss priority
in random-detect command 31
WRED 11
cell loss priority, setting the CLP bit 9, 12, 14
child policies
bandwidth percent command 4
configuration guidelines 13
creating in three-level hierarchical policies 16
description of 4
hierarchical input policing policies 10
nested hierarchical policies 7
three-level hierarchical policies 8
using set and police commands 9
CIR, See committed information rate.
circuit bumping 17
class
class-default 9, 12
deleting from policy map 17
maximum non-class-default classes 9
traffic class 4, 16
class-based traffic shaping 3

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English