Cisco 10000 Series User Manual

Index
IN-4
Cisco 10000 Series Router Quality of Service Configuration Guide
OL-7433-09
class-based weighted fair queuing, See CBWFQ.
class-bundle command 7
class command 19, 5, 9, 10, 21
class-default class 19, 3, 5
description of 11
minimum bandwidth guarantee 6
classification
defining match criteria 5
classification byte counts 12
classifying packets
by DSCP 9
by group ID 9
by IP precedence level 9
creating class maps 1, 11, 12
defining match criteria 5
IP packets using class maps 6
restrictions and limitations 11
verifying traffic criteria 13
class-map command 3, 12
class-map match command 10
class maps
classifying traffic 11
creating 12
defining 8
description of 3, 1
example configuration 8
for per session rate limiting 3, 4
Frame Relay 1
match statements 5, 7
maximum number supported 2
system limits 2
class of service
for Layer 2 to Layer 3 mapping 11
for prioritizing packets 11
IEEE 802.1p standard 10
marking 10
recommended values 21
class policies
configuring in a policy map 9
configuring using tail drop 11
configuring using WRED packet drop 12
class queues
allocating queue IDs 6
maximum number 2
scaling limits 2
class selector code points 6, 7
class-vc command 8
CLI, See modular QoS CLI for implementing QoS.
CLP, See ATM cell loss priority.
command line interface, See modular QoS CLI for
implementing QoS.
commands
access list 10
atm oversubscribe 6
atm over-subscription-factor 31, 15, 6, 11
atm pxf queuing 15, 8
atm vc-per-vp 14
bandwidth 6, 10, 34
bandwidth percent 4
bandwidth remaining 7, 3
bandwidth-remaining 6
bandwidth remaining percent 10, 3
bba-group 27
bump 5
bump (Frame Relay VC-bundle-member) 33
bump explicit 6
bump implicit 6
bundle 6, 9
cbr 13, 8
class 19, 9, 10, 21
class-bundle 7
class-map 3, 12
class-map match 9, 10
class-vc 8
dbs enable 12
dscp (Frame Relay VC-bundle-member) 34
encapsulation dot.1q 19
encapsulation dot1.q 22

Cisco 10000 Series Specifications

General

Brand	Cisco
Model	10000 Series
Category	Network Router
Language	English