Configuring SNMP
Configuring SNMP Security
Cisco Small Business SFE/SGE Managed Switches Administration Guide 317
12
• Basic — Enables
SNMP Basic mode for a selected community and contains the
following fields:
• Access Mode — Defines the access rights of the community. The possible
field values are:
-
Read Only
— Management access is restricted to read-only, and
changes cannot be made to the community.
-
Read Write
— Management access is read-write and changes can be
made to the device configuration, but not to the community.
-
SNMP Admin
— User has access to all device configuration options, as
well as permissions to modify the community.
• View Name — Contains a list of user-defined SNMP views.
• Advanced — Enables
SNMP Advanced mode for a selected community and
contains the following field:
• Group Name — Defines advanced SNMP communities group names.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The device is updated.
Edit SNMP Communities
STEP 1 Click System > SNMP > Security > Communities. The
SNMP Communities Page
opens:
STEP 2 Click the Edit Button. The
Edit SNMP Community Page
:
To Next Page
Loading...
