Changing the Default Font
of
a Note
When you save a note, the last font you chose when the Global font option was
on becomes the default font for the note. The default font
is
chosen automatically
when you reopen the note.
After you save a note, you can specify a different default font for the note by
selecting the icon for the note, choosing Info from the Workbench menu, and
selecting the Add gadget.
Type'
'FONT
= " followed by the name
of
the font (as
shown
in
the
Notepad's
font menu), a period, and a number for the font size (e.g.
FONT
= emerald.20). Finally, press the Return key and select the Save gadget.
Changing the Default Print Type
In
the Notepad's submenu for Print As, the graphic option
is
the default.
To
have the Draft option chosen automatically whenever you open Notepad,
select the Notepad icon , choose Info from the Workbench menu, and select the
Add gadget.
Type'
'FLAGS = draft
",
press the Return key and select the Save
Gadget.
Changing the Default to Form-Feed
Form-feed automatically adds a blank line to the top
of
every page.
To use this as the default setting, select the Notepad icon, choose Info from the
Workbench menu, and select the Add gadget. Type " FLAGS
= form feed " ,
press the Return key, and select the Save Gadget.
Specifying the Global Font Default
You can specify whether or not the Global font option is chosen when you open
the Notepad or a note.
To
do this, select the icon for the Notepad, choose Info
from the Workbench menu, and select the Add gadget.
Workbench Tools
5-27
To Next Page
Loading...
