There are shortcuts you can use to change what appears
in
the gadget and to
move the Text Cursor:
• Press the Amiga key and Q key at the same time
to
get back what was
in
the gadget before you selected it.
• Press the Amiga key and the X key at the same time
to
erase what
appears
in
the gadget.
• Press the Shift key and the left cursor key at the same time
to
move
the Text Cursor to the leftmost character
in
the gadget.
• Press the Shift key and the right cursor key at the same time to move
the Text Cursor to the right
of
the rightmost character
in
the gadget.
When you've finished entering the file description, select Load Icon Image.
If
you decide not to select an icon, select Cancel The Load.
Selecting Additional Icons
With the Icon Editor, you can work with
up
to
nine icons at the same time. To
select an additional icon, first select the frame
in
which you want the icon
to
appear, then choose Load Data from the Disk menu.
Changing an Icon
A magnified view
of
the currently selected frame
is
shown at the left
of
the Icon
Editor window. To change the appearance
of
an icon, you select the frame
in
which
it
appears, then change what appears
in
the magnified view. The tech-
niques for changing the view are described below.
5-34
Workbench Tools
To Next Page
Loading...
