Commodore Amiga 500 - Attaching a Television; Connecting Audio Equipment

Attaching a Television
To use a conventional television as a monitor, you need:
• a TV modulator
• a TV moduLator cabLe
• a TV switch box
You can get these from your Amiga dealer. You' ll find instructions packaged
with them.
Connecting Audio Equipment
The Amiga produces digitized sound. There are two connectors on the back of
the Amiga for connecting the Amiga to audio equipment:
Unless
you've attached a conventional television to the Amiga with a TV
modulator, you need to connect the Amiga to either an audio system or the audio
connector found on some monitors to hear sounds produced by the Amiga.
Setting Up the Amiga 500
2-7