DIGITIZE SYSTEM 3505 - Function 46; Aborting the Printout

System 3505 Installation & Operation Manual
Digitize, Inc. 700248-0002 Rev. C 02/16
Specification Subject to Change Without Notice
17-2
/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
/\/\/\
1 POINT(S) SET
UP
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
\/\/\/
To output this, press “4”, “5” and FUNC.
17.3.2 Function 46
To have the SYSTEM 3505 print out the full point output as programmed press
‘‘4’’, “6” and FUNC. The unit will respond with the point number and the box
code that will activate the point.
/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\
END POINT MEMORY
PRT
POINT 1 BX 12
CODE TO POINT LOG
\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
17.3.3 Aborting the Printout
To abort the code log while it is printing, press the FUNC button. The printout will
abort after the next number is printed.
End of Chapter