System 3505 Installation & Operation Manual
Digitize, Inc. 700248-0002 Rev. C 02/16
Specification Subject to Change Without Notice
5-4
Press FUNC to edit this menu. The display will read:
The next display will read: The programmable keys located below the display screen should
be flashing, with options. The tones for each priority level can be modified for preference of
sound. All priority levels can be modified: FIRE, BURGLARY, FA SUPR, BURG SU,
INDUSTRIAL, PRI LEVEL, ALM LV6, ALM LV7, ALM LV8, TROUBLE, SYSTEM, FA,
FLT, BELL, CLICK, BEEP, and BUZZ. As each selection is made for tone and volume, the
current selected tone will sound. After selecting and modifying the desired tones, press the
SET button to save changes.
• Enter “1” to save the modifications entered; the System printer will report “NEW
SOUNDS SAVED”.
• Enter “2” to discard any modifications made during this session; the System printer will
report “SOUNDS UNCHANGED”.
• Enter “3” to revert to the original factory settings for all tones.
5.5 THERMAL PRINTER INTENSITY PRINTING MODES
Enter “4” press the SET button; the display will read:
Press FUNC, enter password, if prompted. The next display will read:
To Next Page
Loading...
