System 3505 Installation & Operation Manual
Digitize, Inc. 700248-0002 Rev. C 02/16
Specification Subject to Change Without Notice
5-9
• Press
↑
or
↓
(or CHANGE UP/CHANGE DOWN) to set selections to Y (yes) or N (no) as
needed.
• Press ADVANCE TO NEXT FIELD or FUNC button to move between fields. .
• Press CLEAR to ABORT or EXIT SETUP
5.18 DIRECT WIRE DELAY SETUP
Enter “21”, press the SET button and the display will read:
Press the FUNC button to select this screen. The next screen will read:
Press the FUNC key to move between fields. Use ↑ or ↓ to change values, Y (yes) or N (no).
Press the CLEAR key to save changes and return to main set menu.
5.19 PPO-64 POINT OUTPUT OPTION SETUP
Enter “22”, press the SET button and the display will read:
To Next Page
Loading...
