System 3505 Installation & Operation Manual
Digitize, Inc. 700248-0002 Rev. C 02/16
Specification Subject to Change Without Notice
19-4
19.7 DAY MODE TROUBLE CONDITIONS
Any ZONE, DIALER, or BOX, while in the DAY mode, will still process a TROUBLE
condition as it would normally when not in the DAY mode.
19.7.1
Day Mode Priority Level 1
Any ZONE, DIALER, or BOX, while in the DAY mode, will still process a
PRIORITY level 1 alarm. There is no point for the user to program a priority
level one sensor for DAY mode operation. The DAY mode operation will
process normally any sensor that has also been assigned a priority level 1.
19.7.2
Day Mode Exceptions
If a ZONE, DIALER, or BOX is in a NON-SECURE mode when the DAY mode
is activated, they will be processed as if they were not currently in the DAY
mode. Once the ZONE, DIALER, or BOX is restored to a SECURE condition,
then any further changes will be processed in the DAY mode. As an example, a
ZONE is in ALARM and has been ACKnowledged. Then a DAY mode group is
activated which contains this zone. The ZONE will still be displayed in the
ALARM mode. If the ZONE goes SECURE, the operator will still have to
ACKnowledge the ZONE. Any further changes, once the ZONE has gone
secure, will be processed according to the DAY mode operations.
End of Chapter
To Next Page
Loading...
