DIGITIZE SYSTEM 3505 - How to Process Teleg Option Setup

System 3505 Installation & Operation Manual
Digitize, Inc. 700248-0002 Rev. C 02/16
Specification Subject to Change Without Notice
5-11
Press the FUNC key to move between fields. Use ↑ or ↓ to change values. Press the CLEAR key
to save changes and return to main set menu.
5.21 HOW TO PROCESS TELEG OPTION SETUP
Enter “25”, and then press the set button. The display will read:
Press the FUNC button to select this screen. Enter password, if prompted. The next screen will
read:
This menu defines the circumstances under which telegraph box is processed through the menu
options 1-4. The display reads: “Show box decode, but process telegraph box only when:”
• 1=All box rounds are complete. Select option 1 to process telegraph box only when all rounds
are completed (with or without messages).
• 2=First round ends, if a message exists. Select option 2 to process telegraph box only when a
message exists, and only after the first round.
• 3=Item 2, plus ignore codes with no messages. Select option 3 to gain option 2 benefits but
ignore any box code with no messages attached.
• 4=After two successive rounds agree. Select option 4 to telegraph box only when 2 “back-to-
back” rounds agree, with or without a message.
NOW SET= All box rounds are complete.