DIGITIZE SYSTEM 3505 - Password Menu

System 3505 Installation & Operation Manual
Digitize, Inc. 700248-0002 Rev. C 02/16
Specification Subject to Change Without Notice
4-11
To change settings, make a numeric selection to advance to the appropriate
screen. Use selection 1 to set the transmission speed to a fast setting.
1=FST
2=SL
3=DGM
4=INDEX/RATIO
4.3.10 Password Menu
To change the current password, ender the “C” then press the RETURN (or
ENTER) key. (System password “SUPERDIGI” must be entered at the initial
access screen in order to change passwords at this menu.) The display will then
read: For levels 1, 2, and 3, enter the number of the level, then press RETURN
(or ENTER) key. The factory preset passwords for each level are as follows:
7=DAYMODE 4=MSTR
1=L1 2=L2 3=L3
5=cng SET LEVELS
6=IN/OUT ENTER_
<<Change Level p
LEVEL 2 PASSWORD
NOW 2222
ENTER_____________
<<Change Level p
LEVEL 1 PASSWORD
NOW 1111
ENTER____________
<<Change Level p
LEVEL 3 PASSWORD
NOW 3333
ENTER____________
Press SET, ↑ or ↓ to select next
MENU
Press CLEAR to ABORT or EXIT
SETUP
To Change the master password, enter “4” then press the RETURN (or
ENTER) key. The display will read:
ENTER OLD
MASTERPASSW
ORD TO BE
CHANGED
ENTER
____________