E 23
- Remove the bolts (3) on both sides
and keep in the intended hole for safe
storage (3a).
Secure with the corresponding screw.
- Press the function button (operating
panel) to lower the conveyor com-
pletely.
- As soon as the cylinders are fully re-
tracted, close the ball valve (4) at the
quick-release coupling.
- Switch off the engine.
A
On reaching the end position, continue
the lowering function until the ball valve
is closed!
- Remove the locking plate (5) from the
storage position on both sides of the
vehicle and fit in the intended
place (5a).
To Next Page
Loading...