E 24
- Disconnect the hydraulic hoses (6),
the supply line of the spraying
system (7) and chain lubrication sys-
tem (8) of the slewing belt from the
corresponding quick-release cou-
plings of the feeder. Seal all connec-
tions with the safety caps.
- Disconnect the connector (9) and seal
with the safety cap.
- Fit the dummy connector (10) to the
feeder socket; secure it with the corre-
sponding shackles.
A
Position hoses and cables so that
these are not damaged when the vehicle
moves!
To Next Page
Loading...