E 25
- Use the pump to extend the lift sup-
ports (2) to the maximum extent.
- The bearing (11) is now a few centi-
metres above the opening in the vehi-
cle frame.
- Start the engine
m
You must work with a banksman!
The banksman must observe sufficient
safety clearance to the danger zones!
A
Heed the notes for directing the vehicle
in chapter C!
- Move the vehicle slowly forwards
away from the slewing conveyor.
- Make sure that the bearing (11)
moves out of the opening (12)
without touching!
- Secure lift supports (2) with the corre-
sponding retaining pins.
To Next Page
Loading...