EasyManua.ls Logo

Dynapac MF2500CS - Page 542

Dynapac MF2500CS
626 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
F 60 2
Danger due to hydraulic oil
Hydraulic oil under high pressure can cause severe to
fatal injuries!
- Only competent staff should work on the hydraulic
system!
- Any hydraulic hoses that are cracked or soaked through
must be replaced immediately.
- Depressurise the hydraulic system.
- Open hopper, lower conveyor belt if necessary
- Stop the engine and remove the ignition key before any
maintenance work.
- Secure the vehicle to prevent it being switched on again.
- Consult a doctor immediately if injured.
- Comply with all further information in these instructions
and in the safety manual.
Hot surfaces!
Surfaces including those behind covering parts, together
with engine combustion gases can be very hot and cause
injuries!
- Wear your personal safety gear.
- Do not touch hot parts of the vehicle.
- Only perform maintenance and repair work after the
vehicle has cooled down.
- Comply with all further information in these instructions
and in the safety manual.
WARNING
CAUTION

Table of Contents