Chapter 4
| System Management Commands
System Status
– 118 –
CPU Utilization in the past 60 seconds
Average Utilization : 8%
Maximum Utilization : 9%
Alarm Status
Current Alarm Status : Off
Last Alarm Start Time : Jun 9 15:10:09 2011
Last Alarm Duration Time : 10 seconds
Alarm Configuration
Rising Threshold : 90%
Falling Threshold : 70%
Console#
Related Commands
process cpu (202)
show running-config This command displays the configuration information currently in use.
Syntax
show running-config
Command Mode
Privileged Exec
Command Usage
◆ Use this command in conjunction with the show startup-config command to
compare the information in running memory to the information stored in non-
volatile memory.
◆ This command displays settings for key command modes. Each mode group is
separated by “!” symbols, and includes the configuration mode command, and
corresponding commands. This command displays the following information:
■
MAC address for the switch
■
SNMP community strings
■
Users (names, access levels, and encrypted passwords)
■
VLAN database (VLAN ID, name and state)
■
VLAN configuration settings for each interface
■
Multiple spanning tree instances (name and interfaces)
■
IP address configured for management VLAN
■
Interface settings
■
Any configured settings for the console port and Telnet
◆ For security reasons, user passwords are only displayed in encrypted format.
To Next Page
Loading...
Need help?
General