Chapter 5
| SNMP Commands
SNMPv3 Commands
– 198 –
show snmp view This command shows information on the SNMP views.
Command Mode
Privileged Exec
Example
Console#show snmp view
View Name: mib-2
Subtree OID: 1.2.2.3.6.2.1
View Type: included
Storage Type: permanent
Row Status: active
View Name: defaultview
Subtree OID: 1
View Type: included
Storage Type: volatile
Row Status: active
Console#
Table 32: show snmp user - display description
Field Description
SNMP remote user A user associated with an SNMP engine on a remote device.
Engine ID String identifying the engine ID.
User Name Name of user connecting to the SNMP agent.
Group Name Name of an SNMP group.
Security Model Shows the SNMP version 1, 2c or 3.
Security Level Shows if authentication or privacy is used.
Authentication Protocol The authentication protocol used with SNMPv3.
Privacy Protocol The privacy protocol used with SNMPv3.
Storage Type The storage type for this entry.
Row Status The row status of this entry.
Table 33: show snmp view - display description
Field Description
View Name Name of an SNMP view.
Subtree OID A branch in the MIB tree.
View Type Indicates if the view is included or excluded.
Storage Type The storage type for this entry.
Row Status The row status of this entry.
To Next Page
Loading...
Need help?
General