Chapter 29
| IP Routing Commands
Global Routing Configuration
– 807 –
show ip route
summary
This command displays summary information for the routing table.
Command Mode
Privileged Exec
Example
In the following example, the numeric identifier following the routing table name
(0) indicates the Forwarding Information Base (FIB) identifier.
Console#show ip route summary
IP routing table name is Default-IP-Routing-Table(0)
IP routing table maximum-paths is 8
Connected 2
Total 2
Console#
show ip traffic This command displays statistics for IP, ICMP, UDP, TCP and ARP protocols.
Command Mode
Privileged Exec
Example
Console#show ip traffic
IP Statistics:
IP received
4877 total received
header errors
unknown protocols
address errors
discards
4763 delivers
reassembly request datagrams
reassembled succeeded
reassembled failed
IP sent
forwards datagrams
5927 requests
discards
no routes
generated fragments
fragment succeeded
fragment failed
ICMP Statistics:
ICMP received
input
errors
destination unreachable messages
time exceeded messages
parameter problem message
echo request messages
echo reply messages
redirect messages
timestamp request messages
timestamp reply messages
source quench messages
To Next Page
Loading...
Need help?
General