Chapter 23
| LLDP Commands
– 674 –
Eth 1/3 Tx-Rx True
Eth 1/4 Tx-Rx True
Eth 1/5 Tx-Rx True
.
.
.
Console#show lldp config detail ethernet 1/1
LLDP Port Configuration Detail
Port : Eth 1/1
Admin Status : Tx-Rx
Notification Enabled : True
Basic TLVs Advertised : port-description
system-name
system-capabilities
management-ip-address
802.1 specific TLVs Advertised : port-vid
vlan-name
proto-vlan
proto-ident
802.3 specific TLVs Advertised : mac-phy
link-agg
max-frame
MED Notification Status : Enabled
MED Enabled TLVs Advertised : med-cap
network-policy
location
inventory
MED Location Identification:
Location Data Format : Civic Address LCI
Country Name : US
What : 2 - DHCP Client
CA Type 1 : California
CA Type 2 : Orange
DCBX specific TLVs Advertised : ets-config
ets-recommend
pfc-config
Console#
show lldp info
local-device
This command shows LLDP global and interface-specific configuration settings for
this device.
Syntax
show lldp info local-device [detail interface]
detail - Shows configuration summary.
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-32/54)
port-channel channel-id (Range: 1-16/27)
Command Mode
Privileged Exec
To Next Page
Loading...
Need help?
General