Edge-Core AS5700-54X - Show Of-Agent Group

Chapter 21 | Data Center Bridging Commands
Openflow Commands
– 578 –
Match:
In port: 0/0xFFFF0000
Instruction:
Goto table: 10 [VLAN table]
No more flow from ofagent
Console#
show of-agent group This command displays all group settings.
Syntax
show of-agent group [type {group-type | l2-interface | l2-rewrite | l3-unicast
| l2-multicast | l2-flood | l3-interface | l3-multicast | l3-ecmp |
l2-overlay}]
group-type - Specifies group type. (Range: 0-8)
l2-interface - Specifies L2 interface group.
l2-rewrite - Specifies L2 rewrite group.
l3-unicast - Specifies L3 unicast group.
l2-multicast - Specifies L2 multicast group.
l2-flood - Specifies L2 flood group.
l3-interface - Specifies L3 interface group.
l3-ecmp - Specifies L3 ECMP group.
l2-overlay - Specifies L2 overlay group.
Command Mode
Privileged Exec
Example
Console#show of-agent group
Group 0x20001 [L2 Interface] VID: 2, Port: 1
Bucket Index: 0
Output: 1
Group 0x20003 [L2 Interface] VID: 2, Port: 3
Bucket Index: 0
Pop VLAN
Output: 3
Group 0x2002D [L2 Interface] VID: 2, Port: 45
Bucket Index: 0
Pop VLAN
Output: 45
Group 0x30001 [L2 Interface] VID: 3, Port: 1
Bucket Index: 0
Output: 1
Group 0x30003 [L2 Interface] VID: 3, Port: 3
Bucket Index: 0